Liberty consulting
    Building
    Modular Manufacturing
    2011 - 2015
    Full project details

    The 224 meter building will become one of the most recognizable in the square mile, occupying a prominent site directly opposite the distinctive Lloyd’s of London headquarters.

    The structure’s distinct asymmetrical shape – a response to planning requirements to maintain views of Cathedral – meant settlement both in the foundations and through compression of its elements would be irregular.

    Design and engineering
    An iconic building
    Logistics and DfMA
    Delivery and maintenance
    An iconic building

    The development’s tapering shape, which when viewed from the west will appear to ‘lean away’ from St Paul’s Cathedral, delivers varied sizes of floor plates, all offering spectacular views over London. Practical completion of the shell and core is scheduled for mid-2014. The geometry of the 52-storey skyscraper makes it theoretically unstable.

    Exceptional engineering skills were necessary therefore, to develop a construction methodology that enabled the building to stay upright – with tolerances of plus or minus 20mm required on all but five of its floors.

    The team that was assigned to our project…were extremely professional throughout the project and assured that the owner expectations were met and often exceeded.

    - Hamith Jonesten
    Logistics and DfMA

    The intense public interest in the development leaves no room for logistical error. Its high-profile location – characterised by narrow and densely populated streets – along with the site’s remarkably tight footprint, represent considerable obstacles.

    To work around these constraints, much of the structure – including the cores, basement and building services – will be constructed off site. However, with components of up to 26 metres in length this creates its own challenges. Once again, the team used BIM to perfect its strategy for just-in-time assembly.

    Final results


    Trade Center
    Building
    Building Construction
    2010 - 2015
    Full project details

    The scope of works included providing track work for the conveyor system, three conveyors, a crushing station, a skyline tripper, a stockpile pad, a reclaim tunnel and a rail load-out bin.

    Laing O’Rourke self-performed the design and construction of all components, which involved bulk earthworks, rail system construction and integration, signalling and communication, culverts and drainage, remediation works and the installation of coal-handling plant.

    Design and engineering
    An iconic building
    Logistics and DfMA
    Delivery and maintenance
    An iconic building

    The project drew on multidisciplinary strengths across Laing O’Rourke’s rail and infrastructure business units.

    At its peak, the project employed more than 300 people from Laing O’Rourke, Centennial Coal and partner companies across the design, construction, operations and maintenance phases.

    Logistics and DfMA

    Through close liaison with the Australian Rail Track Corporation (ARTC), Laing O’Rourke negotiated a target incentive mechanism, mitigated interface risks and reduced program inefficiencies.

    By providing integrated design and construction services, and preparing concept and preliminary designs and budgets as early as possible, Laing O’Rourke completed the project four months ahead of schedule.

    College Saint Louis
    Building
    Renovation
    2013 - 2014
    Full project details

    The scope of works included providing track work for the conveyor system, three conveyors, a crushing station, a skyline tripper, a stockpile pad, a reclaim tunnel and a rail load-out bin.

    Laing O’Rourke self-performed the design and construction of all components, which involved bulk earthworks, rail system construction and integration, signalling and communication, culverts and drainage, remediation works and the installation of coal-handling plant.

    Design and engineering
    An iconic building
    Logistics and DfMA
    Delivery and maintenance
    An iconic building

    The project drew on multidisciplinary strengths across Laing O’Rourke’s rail and infrastructure business units.

    At its peak, the project employed more than 300 people from Laing O’Rourke, Centennial Coal and partner companies across the design, construction, operations and maintenance phases.

    Logistics and DfMA

    Through close liaison with the Australian Rail Track Corporation (ARTC), Laing O’Rourke negotiated a target incentive mechanism, mitigated interface risks and reduced program inefficiencies.

    By providing integrated design and construction services, and preparing concept and preliminary designs and budgets as early as possible, Laing O’Rourke completed the project four months ahead of schedule.

    Balconi Corp.
    Building
    Building Construction
    2012 - 2014
    Full project details

    The scope of works included providing track work for the conveyor system, three conveyors, a crushing station, a skyline tripper, a stockpile pad, a reclaim tunnel and a rail load-out bin.

    Laing O’Rourke self-performed the design and construction of all components, which involved bulk earthworks, rail system construction and integration, signalling and communication, culverts and drainage, remediation works and the installation of coal-handling plant.

    Design and engineering
    An iconic building
    Logistics and DfMA
    Delivery and maintenance
    An iconic building

    The project drew on multidisciplinary strengths across Laing O’Rourke’s rail and infrastructure business units.

    At its peak, the project employed more than 300 people from Laing O’Rourke, Centennial Coal and partner companies across the design, construction, operations and maintenance phases.

    Logistics and DfMA

    Through close liaison with the Australian Rail Track Corporation (ARTC), Laing O’Rourke negotiated a target incentive mechanism, mitigated interface risks and reduced program inefficiencies.

    By providing integrated design and construction services, and preparing concept and preliminary designs and budgets as early as possible, Laing O’Rourke completed the project four months ahead of schedule.

    Trade Center
    Building
    Building Construction
    2010 - 2015
    Full project details

    The scope of works included providing track work for the conveyor system, three conveyors, a crushing station, a skyline tripper, a stockpile pad, a reclaim tunnel and a rail load-out bin.

    Laing O’Rourke self-performed the design and construction of all components, which involved bulk earthworks, rail system construction and integration, signalling and communication, culverts and drainage, remediation works and the installation of coal-handling plant.

    Design and engineering
    An iconic building
    Logistics and DfMA
    Delivery and maintenance
    An iconic building

    The project drew on multidisciplinary strengths across Laing O’Rourke’s rail and infrastructure business units.

    At its peak, the project employed more than 300 people from Laing O’Rourke, Centennial Coal and partner companies across the design, construction, operations and maintenance phases.

    Logistics and DfMA

    Through close liaison with the Australian Rail Track Corporation (ARTC), Laing O’Rourke negotiated a target incentive mechanism, mitigated interface risks and reduced program inefficiencies.

    By providing integrated design and construction services, and preparing concept and preliminary designs and budgets as early as possible, Laing O’Rourke completed the project four months ahead of schedule.